USB device must support USB 2.0 or USB 3.0; Storage – from your device RAM level to 32 Gb (maximum size on NTFS-formatted USB drive for ReadyBoost). For example, in case you have 2 GB of RAM on PC, your USB flash drive capacity must be at least 2 Gb; The USB flash drive must have at least 256 MB free space. It does not limit the RAM that you may use to create RAM disks, and you may create as many as you have free drive letters for. It supports the saving of images so that data persists across sessions, a lot of command line switches, file system selection for each RAM disk, and an option to launch programs when RAM disks load. Once you’ve decided on a manufacturer, you can pick your RAM. When buying desktop RAM, be sure to buy SDRAM. RAM is best installed in matching pairs, so you may need to buy two or four sticks to get the amount of RAM that you want. For example, to get 8 GB or RAM you might install two 4 GB sticks or four 2 GB sticks. Or, one can use Winimage to just create a single bootdisk. The Win9X OEM disks are Images of the Microsoft bootdisks that came with your OS. They put the utilities you need in a ramdrive, or virtual disk which is usually the next drive letter up from your hard drive partitions. Use my Custom disks for a faster, easier to use utility. The free version can still do a lot of other stuff too like create, delete, and formats partitions, hide/unhide partitions, and mark partitions as active. DriveImage XML is a completely free data recovery program that you can use to create images and backups of logical drives and Windows partitions. Here are a couple of the.
Many users often facing with insufficient RAM memory problem on Windows 10 laptop, old PCs or tablets. A lot of cheap and old devices often decrease own performance because 1-4 Gb of RAM is not enough for comfortable machine functioning.
Often it’s impossible to add RAM:
Specially for such cases, Microsoft created ReadyBoost technology, which allows to use USB flash drives as the additional RAM source for your machine.
Most likely, you’ve heard about Swap file in Windows. In case when the existing RAM is not enough for successful functioning, Windows operating system creates a special file on the hard drive, which is used to provide additional RAM. For sure, that’s a pretty useful feature! But in case of using Swap file, your PC starts decreasing performance because of low HDD write speed.
Since Windows Vista, developers presented a new technology – ReadyBoost. Phone rescue iphone. Caesars casino free spins. It allows to create a Swap file on flash drive or SD card which write speed is much faster than HDD. This feature is used in a recent Windows 10 builds too, so let’s take a closer look on its advantages and disadvantages.
ReadyBoost allows you to use Flash memory to speed up the OS and applications startup due to a much smaller access time when reading and writing data to such memory. ReadyBoost doesn’t require high speeds, much more important is the short access time to flash memory, which is sometimes 10 times less than using HDD. The greatest performance gains are felt when reading 4kb blocks (up to 10 times faster than HDD). While reading large files the effect is lower. In most cases, ReadyBoost is effective when running applications when you need to load many small files and libraries. The greatest gains are achieved when using a slow hard disk (<7200 rpm).
To use the ReadyBoost technology, your USB or SD device must follow the requirements bellow:
Before using ReadyBoost you need format the drive by using the instructions bellow:
After the USB drive was formatted, you need to configure it to use ReadyBoost.
It’s ready! Now your USB flash drive is used to increase PC performance.
Please note that the ReadyBoost feature requires the SuperFetch service to be enabled on Windows (the service is enabled by default, but some users disable it for various reasons). This service manages the disk cache in Windows and uses it to speed up the computer performance.
When a USB device is connected, Windows analyzes it for compliance for technical requirements. If your USB device is not compatible with ReadyBoost technology, the following message will appear on the ReadyBoost tab:
Pastebox 2 1 3 – a clipboard manager. This device cannot be used for ReadyBoost.
ReadyBoost is no enabled because this computer is fast enough that ReadyBoost is unlikely provide additional benefit.
This means that your USB device has insufficient read-write speed, or you have a fairly fast computer, for example, with an SSD and sufficient RAM size (SSD is fast enough to outperform any USB drive).
If your USB device under test shows a random access speed less than 2.5 MB/s, or a random write less than 1.75 MB/s, Windows won’t approve such a device for using the ReadyBoost cache storage. There is a small trick that allows you to turn on ReadyBoost even if the system considers the USB flash drive is not insufficiently productive: Coda 2 0 8 – one window web development suite.
However, in most cases such a trick won’t give a real increase in the computer performance by using a USB flash drive for cache.
Note. It’s important to notice that Swap file on flash drive is coded with the help of AES-128 algorithm, and ensures the security of your data.
The most important thing – never disconnect USB drive from your PC without following the instructions bellow. If not – you can damage USB flash drive and a port itself. Failed to load steam_api64.dll.
In case you decided to stop using USB flash drive as an additional RAM or you just want to disconnect it for some reason, you need to follow these steps:
ReadyBoost USB flash drive can increase your PC performance, but the effect won’t be the same as in case of purchasing the additional RAM. This technology is created to make Internet browsing more comfortable, to make applications run faster etc. In case you need additional RAM to meet the system requirements for heavy applications (for example, for gaming) – ReadyBoost won’t help you: the write speed of USB flash drive is significantly lower than RAM and you will be facing with low system performance all the time.
Thus, ReadyBoost technology allows you to boost performance of old machine in case you don’t want to purchase additional RAM modules. It also can boost your laptop or tablet which RAM cannot be upgraded (in this case it’s better to use SD card). Hope this was useful!
0 
Star